NAVIGATING THE MENU STRUCTURE
OVERVIEW OF USER AND ADMIN LEVELS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 97
Figure 27: Locked, hidden and advanced indicators
NOTE: Setting the access rights on an entry, that is, whether it is admin locked
and/or admin hidden, can only be performed via TPS when logged in
to admin level.
NOTE: If an entry is locked at admin level (or higher), it may only be viewed
at user level. If an entry is hidden at admin level, it is not visible at user
level. You must log in to admin level to see it.
If the system administrator recognises that there is an entry in one of the menus to
which the user requires access, they can use TPS to change the access rights on the
entry to make it accessible at user level, or set up a hot key to access the entry.
Related links:
Overview of access rights on page 262
Logging in to admin level on page 97
Adding a macro on page 271
Logging in to admin level
Admin level provides access to:
• all user-specific information, such as details of channels, scan tables, HF
networks, phone links, NETs and contacts
• transceiver-specific information that affects how the transceiver performs
When you log in to admin level on the control point, the advanced view of the user
interface in the control point is also shown.
To log in to admin level:
1 Press until the main menu screen is shown.
1 From the main menu, select (Admin Login).
locked or hidden
at admin level
entry locked at
a higher level
available in
advanced view
To Next Page
Loading...
Need help?
General
