SETTINGS
SETTINGS > CALLING > ALE
242 E
NVOY™ TRANSCEIVER REFERENCE MANUAL
NOTE: If your HF network consists of only a few Codan HF transceivers with
the FED-STD-1045 ALE/CALM option installed and many other
transceivers, you may want to set the ALE Site Manager entry to
Disabled or Manual to reduce HF network traffic.
ALE Accept ALL Call
The ALE Accept ALL Call entry sets whether or not your transceiver accepts ALL
calls that it detects.
ALL calls are not addressed to a specific station. If your station detects a call with a
matching ALL address syntax, it enters the linked state and alerts the operator. If you
do not want to receive either global or selective ALL calls, disable this feature.
Default value: Enabled
Related links:
ALE address syntax on page 442
ALL call on page 442
ALE Accept ANY Call
NOTE: The ALE Accept ANY Call entry is available if you have the
MIL-STD-188-141B ALE option installed.
The ALE Accept ANY Call entry sets whether or not your transceiver accepts and
responds to ANY calls that it detects.
ANY calls are not addressed to a specific station. If your station detects a call with a
matching ANY address syntax, it sends a response in a random slot to the calling
station. Your station enters a link when it receives an acknowledgement from the
calling station. If you do not want to receive either global or selective ANY calls,
disable this feature.
Default value: Enabled
Related links:
ALE address syntax on page 442
ANY call on page 443
To Next Page
Loading...
Need help?
General
