To Next Page

To Previous Page

OPERATING THE TRANSCEIVER

USING GPS

NVOY™ TRANSCEIVER REFERENCE MANUAL 73

Using GPS

Overview of GPS

Access to GPS information and sending and receiving GPS information is available if

you have the GPS Call option enabled in your transceiver. GPS information may be

sourced from a GPS receiver, selected as a peripheral device, or from information set

up in Settings > GPS > My Position.

GPS information is stored in the Call Log and Call History when it is included with a

call, and your own GPS information can be viewed on the series of tabs on the GPS

screen.

NOTE: When GPS information is sent via a Selcall HF network, the altitude is

shown as --.

The Info and Distance and Bearing tabs are always available when the GPS Call

option is enabled. The Signal Strength and Satellites Constellation tabs are

added when a GPS receiver is connected as a peripheral device.

Figure 17: GPS screen

NOTE: Altitude and speed information is hidden by default. This may be

changed in Settings > GPS > GPS Show Options.

NOTE: Altitude, speed, and GPS position information may be set to show in

the status areas.

Codan Envoy Reference Manual

Other manuals for Codan Envoy