COMPLIANCE
EUROPEAN R&TTE DIRECTIVE
ENVOY™ TRANSCEIVER REFERENCE MANUAL 471
The following safe working distances apply:
• anywhere within the vehicle cabin with an externally mounted mobile antenna
• 3 m unobstructed, of any part of a mobile antenna
• 2 m of any part of a fixed antenna
Safe working distance is based on continuous exposure to CW-type transmissions, as
set out in the Human Exposure Restrictions standard EN 62311:2008.
Declaration of Conformity and Notified Body Letter of Opinion
The CE Declaration of Conformity and Notified Body Letter of Opinion for this
product are available upon request to Codan or a Codan-authorised supplier.
Protection of the radio spectrum
CAUTION: Most countries restrict the use of HF radio communications equipment
to certain frequencies and bandwidths and/or require such equipment
to be licensed. It is the user’s responsibility to check the specific
requirements with the appropriate communications authorities. Some
options may vary the stated compliance. If necessary, contact Codan
for more information.
The receive and transmit frequencies may be any frequencies within the HF range,
however, the transmit frequencies can only be those allocated to you by the relevant
government authority in your country.
Spectral regulations may require the TxD option to be installed in the transceiver. In
this case, you cannot add channels with new transmit frequencies. You can, however,
add receive-only channels, and channels with the same transmit frequency as an
existing channel. If the TxP option is installed in the transceiver, you cannot add
channels.
To Next Page
Loading...
Need help?
General
