Codan Envoy - Setting the Privacy Code for CIVS

ENCRYPTION
CIVS VOICE SCRAMBLER
338 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Setting the privacy code for CIVS
The privacy code is used when CIVS is activated. This can be changed while CIVS is
active.
To set the privacy code:
1 From the main menu, select (Settings), then (Security).
1 Press or to scroll to the Privacy Code entry.
1 Press or to select the code that you want to use for the CIVS scrambler.
1 Press (Save) to save the information.
1 Press (Close).
Related links:
Logging in to admin level on page 97
Privacy Code on page 254