OPERATING THE TRANSCEIVER
USING THE CLARIFIER
ENVOY™ TRANSCEIVER REFERENCE MANUAL 67
Using the clarifier
The clarifier is a feature that enables you to adjust the receive frequency to
compensate for any frequency offset between your transceiver and the remote
transceiver, thus improving the quality of received voice.
To use the clarifier:
1 Go to the channel screen and ensure that scanning is switched off.
1 Do one of the following:
• If you are using a 2220 Handset or 2230 Desk Console, press
FUNC.
• If you are using a 2221 Handset, press (Menu), select
(Functions), scroll to Clarifier, then press (OK).
1 Press or to increase or decrease the pitch of the received voice, then
press OK.
If you select a positive clarifier offset from the frequency, the Rx indicator
changes to an up arrow. If you select a negative clarifier offset from the
frequency, the Rx indicator changes to a down arrow.
When you select another channel/mode the clarifier is reset to the centre point.
To Next Page
Loading...
Need help?
General
