KEYS AND MACROS
KEYPAD
ENVOY™ TRANSCEIVER REFERENCE MANUAL 265
Keypad
Standard macros are programmed in the transceiver in the factory. You can also create
a macro and assign it to a hot key.
Table 9: Keys and their function
Key Function
Switches on the transceiver.
Switches off the transceiver (hold for 2 sec).
Performs a hot-key sequence with another key (hold + key):
• + 0 jumps to the Brightness screen
• + 2 toggles advanced view
• + 3 jumps to the Select Language screen (admin hidden)
• + SEC performs secure erase (if enabled)
Starts a chain call of all of the calls included with the selected emergency
contact (hold for 2 sec).
PTT Press-to-talk.
Cancels out of editing and calls before they are connected, returning
directly to the channel/scanning screen.
Performs the function shown directly above the key in the menu bar of the
screen.
Scrolls left in a list of values.
Moves the cursor/highlight to the left.
Reduces the volume when the indicator is shown in the menu bar of the
screen.
Scrolls right in a list of values.
Moves the cursor/highlight to the right.
Increases the volume when the indicator is shown in the menu bar of
the screen.
Scrolls up in a list of entries.
Moves the highlight up a row.
Scrolls down in a list of entries.
Moves the highlight down a row.
To Next Page
Loading...
Need help?
General
