SETTINGS
SETTINGS > SECURITY
254 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Settings > Security
The security settings enable you to set up how the encryptor module in the transceiver
behaves, and how you may select, edit or delete security keys.
Related links:
CES-128 Mode on page 254
Privacy Code on page 254
Standby After Selcall on page 255
Secure User Access on page 255
General Options on page 256
Secure Start State on page 256
CES Options on page 256
CES Key Prefix on page 257
Digital Key Prefix on page 257
Digital Voice Options on page 257
Digital Mute Start State on page 257
CES-128 Mode
The CES-128 Mode entry sets the default secure mode of the CES-128 voice
encryptor. This mode is used each time you press SEC to go secure using the Global
key, or the selected Corp-xx key.
NOTE: You can change the secure mode during a secure session. This does not
change the value that you set for the CES-128 Mode entry.
If you want to:
• use a secure key for encryption that is common to all Codan CES-128 voice
encryptors, select Global
• use a secure key for encryption that has been created for use in your
organisation, select Corporate
Default value: Global
Privacy Code
The Privacy Code entry sets the level at which the CIVS scrambler operates when
you press
SEC.
NOTE: You may be permitted to change the level during a secure session by
holding SEC.
Range: 1 to 32
Default value: 21
To Next Page
Loading...
Need help?
General
