KEYS AND MACROS
WORKING WITH MACROS
276 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Completing the macro
To complete the macro:
1 If you want to add another macro step, press (Options), scroll to Add
Step, then press (Select) to add a step.
NOTE: When more than one macro step exists for the macro, you can
move the steps to the order in which you want them performed.
1 Continue adding steps until the macro is defined.
1 Press (Options), scroll to Save, then press (Select).
Editing a macro
Editing a macro is similar to adding a macro.
NOTE: If you want to re-assign a macro between Unassigned and a hot key,
edit the macro to select the new key/Unassigned.
To edit a macro:
1 From the main menu, select (User Data), then (Macros).
1 Press or to scroll to the macro that you want to edit, then press OK.
1 Continue with the process for adding a macro.
Related links:
Adding a macro on page 271
To Next Page
Loading...
