KEYS AND MACROS
WORKING WITH MACROS
ENVOY™ TRANSCEIVER REFERENCE MANUAL 275
1 Navigate to the setting that you want to view or edit, then press (Select).
1 Press to move to the Operation entry.
1 Press or to scroll through the following values:
• To access the entry for editing at the time of the macro, select Open.
• To set a value in the entry at the time of the macro, select Set.
• To toggle the state of the entry at the time of the macro, select Toggle.
1 If you selected Set for the operation, do the following:
• Press to move to the Value entry.
• Press or to select the value that you want to use.
1 Press to move to the Delay entry.
1 Enter the delay (in msec) that you want between the macro steps.
1 Press (Save) to save the information.
1 Continue from Completing the macro on page 276.
To Next Page
Loading...
Need help?
General
