OPERATING THE TRANSCEIVER
CALLING
48 ENVOY™ TRANSCEIVER REFERENCE MANUAL
General calling
Figure 15: Call screen with Call Log
Related links:
Making a Selective call on page 48
Making a Channel Test call on page 50
Making a Message call on page 53
Making a Phone call on page 56
Making a Send Position call on page 57
Making a Get Position call on page 58
Making a Get Status call on page 60
Making an Emergency call on page 62
Making an RFDS Emergency call on page 63
Making a Marine Emergency call on page 64
Making an ALE Sounding call on page 65
Making a Selective call
If you want to speak with the operator at a particular station, make a Selective call to
the address of that station. When the station receives the call, the transceiver sounds
an alert tone to notify the operator.
To make a selective call:
1 Press CALL.
The call type and address of the last call are shown at the top of the call screen.
The filtered call log below this shows the latest instance of any call type made
to or received from a particular address.
incoming call
outgoing call
navigation
indicator
call type HF network
address
select HF network
To Next Page
Loading...
Need help?
General
