OPERATING THE TRANSCEIVER
CALLING
64 ENVOY™ TRANSCEIVER REFERENCE MANUAL
NOTE: The RFDS Emergency call type is only available if an RFDS HF
network is selected.
1 If you do not want to use the HF network shown at the top right of the screen:
•Press (Options).
• Scroll to HF Networks, then press (Select).
• Scroll to the HF network that you want to use, then press OK.
1 Press CALL.
1 If prompted, press or to scroll to the channel that you want to use, then
press CALL.
A is shown next to the currently selected channel/mode.
1 Wait for an RFDS operator to answer your call.
Related links:
RFDS Emergency call on page 440
Making a Marine Emergency call
If you want to broadcast an emergency hee-haw alert tone, make a Marine Emergency
call.
To make a Marine Emergency call:
1 Press CALL.
The call type and address of the last call are shown at the top of the call screen.
The filtered call log below this shows the latest instance of any call type made
to or received from a particular address.
To Next Page
Loading...
Need help?
General
