NAVIGATING THE MENU STRUCTURE
ENTERING TEXT IN A FIELD
ENVOY™ TRANSCEIVER REFERENCE MANUAL 103
Entering text in a field
You may need to enter text into a field within an entry. This may be a name given to
some user data, or it may be a specific value, such as a frequency. When you first enter
an editable text field, either by selecting a menu or using the and navigation keys,
any existing text that you can edit is highlighted. You can use this text, edit this text,
or delete this text and enter new text.
Figure 31: Example of an editable text field
To enter text in a field:
1 Navigate to a field in which you can edit text.
1 If you want to change the input language:
• Hold .
• Press or to scroll to the input language that you want to use, then
press OK.
•Press (Save).
1 Do one of the following:
• To use this text, press .
• To delete this text, start entering new text.
• To edit this text, press to place the cursor at the end of the text.
1 Press repeatedly to select the character-entry mode that you want to use.
The indicator for the character-entry mode is shown in the centre of the menu
bar.
NOTE: The character-entry mode indicators are specific to each
language selection.
NOTE: The input language may be different from the language selected
for the user interface.
To Next Page
Loading...
Need help?
General
