OPERATING THE TRANSCEIVER
THE CHANNEL SCREEN
ENVOY™ TRANSCEIVER REFERENCE MANUAL 27
Selecting a channel
To select a channel:
1 Press PTT to exit to the channel or scanning screen.
1 If the transceiver is scanning, press SCAN to switch off scanning.
1 Press or to scroll to the channel that you want to use.
The channel is selected.
NOTE: If you want to change the sideband, press MODE. If the mode
does not change, there is only one mode for the channel.
NOTE: If you have an automatic antenna tuner fitted, press PTT to tune
the antenna to the currently selected channel.
1 Do any of the following:
• Hold OK to edit the channel, if permitted.
•PressOK to search for a channel.
•PressCALL to start a call.
• Hold CALL to go to Contacts.
Related links:
Finding a word or value on page 99
Call Key Options on page 207
To Next Page
Loading...
