OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER REFERENCE MANUAL 45
Calling
This section describes how to make the various types of calls from the transceiver.
You can make a call to a contact, return or repeat a call from the Call History, or enter
information at the time of the call.
Related links:
Making a call to a contact on page 45
Making a call from the Call History on page 46
Making a call from the Emergency key on page 47
General calling on page 48
Making a call to a contact
NOTE: The default behaviour for the CALL key is to press it to start a call, or
hold it to see your Contacts/Call History.
To make a call to a contact:
1 Hold CALL.
1 Press or to scroll to the contact who you want to call.
1 If required, press or to scroll to the call that you want to make.
The call types that are available for the contact are set up in User Data >
Contacts.
NOTE: If only one call has been set up for the contact, you cannot select
a different call type at the time of the call.
1 Press CALL.
NOTE: Depending upon the call type and other information stored with
the contact, you may be prompted to select information during
the call. Press CALL to progress through these prompts.
To Next Page
Loading...
Need help?
General
