SETTINGS
SETTINGS > CALLING > ALE
E
NVOY™ TRANSCEIVER REFERENCE MANUAL 249
ALE Selective Message
NOTE: The ALE Selective Message entry is available if you have the
MIL-STD-188-141B ALE option installed.
The ALE Selective Message entry sets whether or not you can send a message
with a Selective call made in an ALE/CALM HF network.
If the ALE Selective Message entry is set to Enabled, you are prompted to
include a message with a Selective call in an ALE/CALM HF network.
Default value: Disabled
ALE Silent Mode
The ALE Silent Mode entry prevents automatic ALE transmissions from the
transceiver.
If you want the transceiver to:
• operate as a normal ALE station, select Disabled
• be able to make ALE calls but not receive them, and receive sounding signals
but not transmit them, select Enabled
Default value: Disabled
ALE Soundings
NOTE: The ALE Soundings entry is available if you have the
MIL-STD-188-141B ALE option installed.
The ALE Soundings entry sets the conclusion that the transceiver sends with a
sounding.
If you want the transceiver to:
• switch off all sounding activity regardless of the Sounding Interval entry,
select Disabled
• send a TWAS conclusion to the sounding, that is, not remain in a state that
accepts a link, select Default
• send a TIS conclusion to the sounding, that is, pause at the end of the sounding
ready to accept a link, select Invite link
Default value: Default
Related links:
Sounding interval on page 145
To Next Page
Loading...
Need help?
General
