SETTINGS
SETTINGS > CONTROL POINT > GENERAL
ENVOY™ TRANSCEIVER REFERENCE MANUAL 205
Settings > Control Point > General
The general settings for a control point enable you to customise the behaviour of the
particular control point that you are operating.
Related links:
Welcome Image on page 205
Welcome Text on page 206
USB User Access on page 206
Channel Scroll on page 206
Show Channel Frequency on page 207
Frequency Format on page 207
Call Key Options on page 207
Night Display Brightness on page 208
Night Display Start on page 208
Night Display Stop on page 208
Local Welcome Text on page 208
Brightness on page 209
Custom Brightness on page 209
Auto Dim Time on page 209
Key Beeps on page 209
Beeps and Tones on page 210
Theme on page 210
Night Theme on page 210
Show Background Image on page 210
Logging on page 211
Logging Level on page 211
Welcome Image
The Welcome Image entry sets the image that is shown on the screen during power
up. The first image shown is the factory-set splashscreen, followed by the welcome
image, if loaded. The image is added into a profile in TPS, then you select the portion
of the image that you want to view at the control point in the preview window. You
can also fit the image to the screen.
Once a welcome image is loaded into the transceiver via TPS, it cannot be disabled
via the control point. The image will be shown on the second restart of the transceiver
following programming.
The Welcome Image may be .png or .jpg at a resolution of 320 × 240 pixels.
Default value: None
To Next Page
Loading...
Need help?
General
