OPERATING THE TRANSCEIVER
CALLING
56 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Making a Phone call
If you want to speak with an operator on a phone line, make a Phone call to that
number. The transceiver makes an HF call to a telephone station (phone link), which
connects through to the public telephone network.
To make a Phone call:
1 Press CALL.
The call type and address of the last call are shown at the top of the call screen.
The filtered call log below this shows the latest instance of any call type made
to or received from a particular address.
1 Press or to select the Phone call type if it is not selected.
1 Do one of the following:
• Enter the phone number that you want to call, then press CALL.
• To repeat or return a call from the Call Log, press to scroll to the call,
press or to select your required call type, then press CALL.
1 If you are prompted to add a phone link, do the following:
• Enter the name that you want to use for the phone link.
• Press to move to the HF Network entry.
• Press or to select the HF network that you want to use.
• Press to move to the Selcall|ALE Address entry.
• Enter the address of the telephone station.
•Press (Save).
1 If you are prompted to select a phone link, scroll to the phone link that you want
to use, then press CALL.
1 If prompted, press or to scroll to the channel that you want to use, then
press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate that the call has
been successful.
1 Press SCAN, then press (Hangup) to end the call.
To Next Page
Loading...
Need help?
General
