Codan Envoy Reference Manual

OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER REFERENCE MANUAL 55
1 If you want to select a message from a list of stored messages:
•Press (Options), scroll to Stored, then press (Select).
• Press or to scroll to the message that you want to use.
NOTE: If you want to view the message, press (Details) to
view the message, then press (Close).
•PressOK to select the message.
• Edit the message, if required.
•Press (Options), scroll to OK, then press (Select).
1 If prompted, press or to scroll to the channel that you want to use, then
press CALL.
A is shown next to the currently selected channel/mode.
To abort the call before it is answered, press PTT or SCAN.
There will be audible beeps or a pop-up message to indicate that the call has
been successful.
Related links:
Message call on page 438
Entering text in a field on page 103
Using multiple addresses for calls in an ALE/CALM HF network on page 453
Group calls in a Codan Selcall HF network on page 452

Codan Envoy Specifications

General

Brand	Codan
Model	Envoy
Category	Transceiver
Language	English