SCAN TABLES
WORKING WITH SCAN TABLES
136 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Duplicating a channel in a scan table
If a channel has more than one allowed mode, you can select the mode that is scanned
when you add the channel to the scan table. If you want to have all allowed modes for
the channel scanned, duplicate the channel and select a different allowed mode.
Duplicating a channel and using the same mode doubles the length of time per scan
cycle that the channel is scanned. The transceiver automatically scans these two
instances of the same channel/mode together.
To duplicate a channel:
1 From the main menu, select (User Data), then (Scan Tables).
1 Press or to scroll to the scan table in which you want to duplicate a channel,
then press OK.
1 Press to move to the Scan Channels entry.
1 Press to view the list of channels in the scan table.
1 Press or to scroll to the channel that you want to duplicate.
1 Press (Options), scroll to Duplicate, then press (Select).
The duplicate channel is highlighted. If there is more than one allowed mode for
the channel, / indicators appear on both sides of the mode field.
1 Press or to select a different mode for the channel, if required.
1 Press (Options), scroll to Save, then press (Select).
Related links:
Adding a channel on page 123
Clearing the channels from a scan table
Clearing channels from a scan table is a quick way of removing all channels from the
list of scanned channels. It is the same as deleting channels from a scan table, except
that all of the channels are removed in one action. The channels that are cleared from
the scan table are not deleted from the transceiver. The channels that you clear from
the scan table will be available for adding back into this scan table using the Add
Chan option.
To clear the channels from a scan table:
1 From the main menu, select (User Data), then (Scan Tables).
1 Press to scroll to the scan table from which you want to clear all channels,
then press OK.
1 Press to move to the Scan Channels entry.
1 Press to view the list of channels in the scan table.
1 Press (Options), scroll to Clear, then press (Select).
To Next Page
Loading...
Need help?
General
