Codan Envoy Reference Manual

USING THE WIZARD
USING THE WIZARD
ENVOY™ TRANSCEIVER REFERENCE MANUAL 19
1 If you want to enter a message:
• Start typing the message.
NOTE: Press OK to start a new line, if required.
•Press (Options), scroll to Save, then press (Select) to add the
message to the call.
1 If you want to select a message from a list of stored messages:
•Press (Options), scroll to Stored, then press (Select).
• Press or to scroll to the message that you want to use.
NOTE: If you want to view the message, press (Details) to
view the message, then press (Close).
•PressOK to select the message.
• Edit the message, if required.
•Press (Options), scroll to Save, then press (Select).
1 Continue from Completing the contact on page 20.
Adding a Phone call
To continue with adding a Phone call:
1 Press to move to the Phone Number entry.
1 Enter the phone number.
1 Continue from Completing the contact on page 20.

Codan Envoy Specifications

General

Brand	Codan
Model	Envoy
Category	Transceiver
Language	English