INSTALLATION
MOBILE STATIONS
392 ENVOY™ TRANSCEIVER REFERENCE MANUAL
Mounting positions that are recommended in a mobile installation include:
• the transmission hump
• in place of the glove box
• behind the seat
• under the dashboard (if safe)
WARNING: Do not mount the transceiver on a cargo barrier as this may void the
vehicle manufacturer’s warranty.
The mounting position must ensure sufficient cable length is provided to enable the
removal of the equipment from the cradle with the various cables connected.
Related links:
Specifications on page 379
Positioning the control points
The control points and speaker must be in a position that:
• suits the operator
• is near the operating position
• is clear of other controls
• is not dangerous to the driver or passengers
• considers cable routing
Installing the cables
WARNING: Do not cut the control, coaxial or speaker cable. If the cables are too
long, gather the excess neatly and secure each bundle separately so that
it is out of the way. Do not stack the bundles together.
CAUTION: Large magnetic fields can be generated along the power cable during
transmission and these fields may be coupled into the control cabling.
Failure to keep these cables separated causes distortion of the
transmitted signal.
To Next Page
Loading...
Need help?
General
