ENVOY™ TRANSCEIVER REFERENCE MANUAL 23
3
Operating the
transceiver
This section contains the following topics:
• Switching the transceiver on and off on page 24
• The channel screen on page 25
• Scanning channels on page 33
• Muting the transceiver on page 35
• Using the microphone on page 37
• Manually tuning the antenna on page 38
• Selecting a language on page 39
• Setting the time and date on page 40
• Setting the brightness of the display on page 41
• Setting the display timeout on page 42
• Setting the location of the desk console on page 43
• Calling on page 45
• Using the clarifier on page 67
• Reducing background noise with Easitalk™ on page 68
• Viewing information about your transceiver on page 69
• Using GPS on page 73
• Using encryption on page 77
• Using a crosspatch on page 82
• Upgrading the transceiver via a USB stick on page 84
• Entering a password for an option on page 85
• Performing a self-test on page 86
• Finding an RFU on page 87
To Next Page
