Datalogic AV7000 User Manual

E-GENIUS
124 AV7000 LINEAR CAMERA
Redundant Controller Settings
Controller Mode: Camera_1
Select one of the following from the drop-down list:
•
Auto-Detect: This option is used when the camera is in a redundant application. In this
configuration there are two camera's that will be connected to a CBX510. When Auto-Detect
is selected the camera that initializes first will become the DHCP controller and assume the
192.168.0.145 IP. The Secondary Controller will assume the 192.168.0.146 IP.
•
Primary Controller: This option is used when the camera is in a redundant application. In
this configuration there are two camera's that will be connected to a CBX510. When Primary
Controller is selected the camera selected as the Primary Controller will become the DHCP
controller and assume the 192.168.0.145 IP. The Secondary Controller will assume the
192.168.0.146 IP.
•
Secondary Controller: This option is used when the camera is in a redundant application.
In this configuration there are two camera's that will be connected to a CBX510. When
Primary Controller is selected the camera selected as the Primary Controller will become the
DHCP controller and assume the 192.168.0.145 IP. The Secondary Controller will assume the
192.168.0.146 IP.
Tunnel Software Update
Allow automatic software updates
Select the check box to enable all cameras in the tunnel to automatically update when
software is loaded to one of the cameras.
3. When you have finished making changes, click Update to save or click Reset to
revert to the previously saved values.

Datalogic AV7000 Specifications

General

Brand	Datalogic
Model	AV7000
Category	Digital Camera
Language	English