E-GENIUS
126
AV7000 LINEAR CAMERA
ONLINE AND CONTINUOUS MODE
If Online or Continuous Mode has been selected as the Operating Mode, the following
parameters will be available.
Minimum Settings
Enter the minimum detection size setting for the object length.
Maximum Settings
Enter the maximum detection size setting for the object length.
SIDE BY SIDE VERIFICATION SETTINGS (DIMENSIONER ONLY)
If Side by Side Verification have been enabled in Operating Mode, several parameters
are revealed.
The Dimensioner has the ability to indicate when packages are too close to one another on the
belt. This is called a
Side By Side Condition. However some parcels like cases of water can
cause a false identification by the Dimensioner. The Side by Side Verification Settings options
allow the AV500/900 to use the bar code data to ignore the SBS message from the
dimensioner.
To Next Page
Loading...
Need help?
General
