APPENDIX B
464
AV7000 LINEAR CAMERA
Sometimes an error is received stating that Camera “x” is also set for Trigger.
There is a possibility that I/O parameters were copied over when “Active Configu
-
ration” was set. If the error appears, click
OK.
Once Secondary “Trigger” function has been verified calibrate (packtrack) the sys-
tem as per standard practice. All other parameters were copied from the primary
c
onfiguration.
11. Since the system is running in the opposite conveyor direction any Camera that
w
as considered a Right-Side mount for the Primary direction of travel is now a Left
Side mount for the Secondary. It is necessary to change the Camera Position and
Camera Name.
To Next Page
Loading...
