Pro Tools Reference Guide338
2 Do one of the following:
• Press Start+Minus (Windows) or Con-
trol+Minus (Mac) on the QWERTY key-
board.
– or –
• With Commands Keyboard Focus enabled
(see “Keyboard Focus” on page 16), press
Minus on the QWERTY keyboard.
Audio tracks are toggled between Waveform and
Volume View. MIDI and Instrument tracks are
toggled between Notes and Regions View.
Master Views for Tracks
Audio, MIDI, and Instrument tracks have Track
Views that act as “master.” When a track is dis-
played in its Master View, any edits performed
apply to all data in the track. For instance, when
an audio track is set to Waveform, copying and
pasting affects not just the waveform informa-
tion, but all of the automation data as well.
The Master View is based on the type of track, as
follows:
• Audio tracks: Waveform and Blocks
• MIDI and Instrument tracks: Regions,
Blocks, and Notes (when using the Selector
tool)
Auxiliary Input, Master Fader, and VCA Master
tracks also have a Master View (Volume). When
an Auxiliary Input or Master Fader track is dis-
played in its Master View, any edits performed
apply to all automation data in the track.
Track Height
Tracks can be viewed in the Edit window at any
of eight heights: Micro, Mini, Small, Medium,
Large, Jumbo, Extreme and Fit To Window. Larger
track heights are particularly useful for precise
editing, especially for MIDI. Smaller track
heights are useful for conserving screen space in
a large session.
You can adjust track heights on an individual
track basis or set all tracks to the same height.
Track heights can be adjusted during playback.
To set the Track Height, do one of the following:
■ Click the small arrow next to the Track View
selector to get the Track Height pop-up menu.
– or –
■ Right-click in the area just to the right of the
track controls and choose the height from the
pop-up menu.
To toggle Track Views for all tracks, press
Alt+Start+Minus (Windows) or Op-
tion+Control+Minus (Mac) on the QW-
ERTY keyboard.
To toggle Track Views for all tracks with
Command Focus enabled, press Alt+Minus
(Windows) or Option+Minus (Mac) on the
QWERTY keyboard.
Track Height pop-up menu
To Next Page
Loading...
Need help?
General
