Emotron VS10 - Page 201

Parameter
Name / value range / [default setting]
Info
Bit 13
Mapping bit 13
Mappable data word for the output of status messages of the inverter
via network.
Assignment of the status message: 0x2634:023 (P420.23)
Bit 14
Mapping bit 14
Mappable data word for the output of status messages of the inverter
via network.
Assignment of the status message: 0x2634:024 (P420.24)
Bit 15
Mapping bit 15
Mappable data word for the output of status messages of the inverter
via network.
Assignment of the status message: 0x2634:025 (P420.25)
0x400A:002
(P591.02)
Process output words: NetWordOUT2
(NetWordOUTx: NetWordOUT2)
Read only
Mappable data word for the output of messages of the "Sequencer"
function via network.
Configuration of the messages:
0x4026:008: NetWordOUT2 value for sequencer segment 1
0x4027:008: NetWordOUT2 value for sequencer segment 2
0x4028:008: NetWordOUT2 value for sequencer segment 3
0x4029:008: NetWordOUT2 value for sequencer segment 4
0x402A:008: NetWordOUT2 value for sequencer segment 5
0x402B:008: NetWordOUT2 value for sequencer segment 6
0x402C:008: NetWordOUT2 value for sequencer segment 7
0x402D:008: NetWordOUT2 value for sequencer segment 8
0x402E:008: NetWordOUT2 value for final segment
Bit 0
Mapping bit 0
Bit 1
Mapping bit 1
Bit 2
Mapping bit 2
Bit 3
Mapping bit 3
Bit 4 Mapping bit 4
Bit 5
Mapping bit 5
Bit 6
Mapping bit 6
Bit 7
Mapping bit 7
Bit 8
Mapping bit 8
Bit 9 Mapping bit 9
Bit 10
Mapping bit 10
Bit 11
Mapping bit 11
Bit 12
Mapping bit 12
Bit 13
Mapping bit 13
Bit 14 Mapping bit 14
Bit 15
Mapping bit 15