Lexmark 7462 series - Page 135

260 error messages
Error code Description Action
260.00 Envelope feeder area jam
The media is jammed in the envelope feeder area.
Go to
“Envelope feeder area jam service
check” on page 135.
260.01 Envelope feeder assembly error
Mechanical feed error or timing error.
Go to
“Envelope feeder assembly error service
check” on page 136.
260.02
260.05 Sensor (envelope feeder pass through) lingering
jam (envelope feeder)
The media reached the sensor (envelope feeder
pass through), but did not clear it in the
specified
time.
Go to
“Sensor (envelope feeder pass through)
lingering jam (envelope feeder) service
check” on page 137.
260.06 Sensor (envelope feeder pass through) late jam
(envelope feeder)
The media is late reaching the sensor (envelope
feeder pass through) within the specified time.
Go to
“Sensor (envelope feeder pass through)
late jam (envelope feeder) service check” on
page 138.
260.07 Sensor (input) late jam (envelope feeder)
The media is late reaching the sensor (input)
within the specified time.
Go to
“Sensor (input) late jam service check”
on page 73.
260.10
260.11
260.12
260.13 sensor (envelope feeder pass through) static jam
Media remains on the sensor (envelope feeder
pass through) during the warm-up sequence.
Go to
“Sensor (envelope feeder pass through)
static jam service check” on page 139.
260.14 Sensor (input) late jam (envelope feeder)
The media is late reaching the sensor (input)
within the specified time.
Go to
“Sensor (input) late jam service check”
on page 73.
260.15
260.16
Envelope feeder area jam service check
Action Yes No
Step 1
Remove the envelope feeder.
Does the problem remain?
Go to step 2. Problem is solved.
Step 2
Remove all media present in media path.
Does the problem remain?
Go to step 3. Problem is solved.
Step 3
Properly reinstall media.
Does the problem remain?
Go to step 4. Problem is solved.
7462
Diagnostic information
135