Diagnostic aids 3-107
7558-xxx
• Media eject clamp motor
– A DC motor that elevates or lowers the media eject clamp when feeding media from the punch to the
compiler unit assembly or from the compiler unit assembly to the stacker media bin.
• Sensor (media eject clamp HP)
– A photo-interrupter sensor that detects the set clamp home position.
– This sensor functions as a trigger to control On/Off of the set clamp clutch.
• Media eject clutch
– When this clutch is activated, it transmits the media eject motor assembly rotating power to the media
eject shaft assembly.
Booklet tray
Paper is folded into two by the booklet folding roll driven by the booklet Fold Roll Motor and booklet Eject Roll,
and delivered to the booklet tray. Booklet tray is at a position lower than the paper delivery exit. Paper delivery
belt will move at fixed interval for every set of output. When two sets or more are being delivered, one set at a
time is being delivered.
Sensor (stacker bin level 1)
Sensor (stacker bin level 2)
Media eject clutch
Sensor (stacker bin upper limit)
Sensor (stacker bin no media)
Stacker bin
lift motor assembly
Sensor (stacker bin
level encoder)
Sensor (media
eject shaft HP)
Media eject
motor assembly
Sensor (media
eject clamp HP)
Eject clamp motor
To Next Page
Loading...
