Lexmark X95 series - 2 Xx Service Error Codes

Diagnostic information 2-21
7558-xxx
Go Back
Previous
Next
2xx service error codes
Error code Description Action
200.01
Paper jam
Sensor (registration) static jam Media remains detected by the sensor
(registration) after power on.
Go to “200.01 Sensor (registration)
static jam” on page 2-89.
200.03
Paper jam
Sensor (registration) late jam (feeding
from the tray)
The media is late reaching the sensor
(registration) within the specified time after
the registration clutch is turned on.
Go to “200.03 Sensor (registration) late
jam (feeding from the tray)” on
page 2-90.
200.03
Paper jam
Sensor (registration) late jam (feeding
from the MPF)
The media is late reaching the sensor
(registration) within the specified time after
the MPF pick solenoid is turned on.
Go to “200.03 Sensor (registration) late
jam (feeding from the MPF)” on
page 2-92.
200.05
Paper jam
Sensor (registration) lag jam The media reached the sensor
(registration) but did not clear it within the
specified time.
Go to “200.05/200.55 Sensor
(registration) lag jam” on page 2-93.
200.53
Paper jam
Sensor (registration) late jam
80K interval for feed rollers exceeded
in tray 1
The media is late reaching the sensor
(registration) within the specified time after
being fed from any given media tray.
Go to “200.53 Sensor (registration) late
jam (80K interval exceeded for feed
rolls)” on page 2-95.
200.55
Paper jam
Sensor (registration) lag jam
80K interval for feed rollers exceeded
in tray 1
The media reached the sensor
(registration) but did not clear it within the
specified time.
Go to “200.05/200.55 Sensor
(registration) lag jam” on page 2-93.
201.01
Paper jam
Sensor (media on belt) static jam Media remains detected by the sensor
(media on belt) after power on.
Go to “201.01 Sensor (media on belt)
static jam” on page 2-98.
201.03
Paper jam
Sensor (media on belt) late jam
The media is late reaching the sensor
(media on belt) within the specified time
after reaching the sensor (registration).
Go to “201.03 Sensor (media on belt)
late jam” on page 2-99.
202.01
Paper jam
Sensor (fuser exit) static jam Media remains detected by the sensor
(fuser exit) after power on.
Go to “202.01 Sensor (fuser exit) static
jam” on page 2-101.