Lexmark X95 series - MPF Top Cover Removal; Operator Panel Front Cover (MFP) Removal

4-8 Service Manual
7558-xxx
Go Back
Previous
Next
MPF top cover removal
1. Remove the left rear lower cover. See “Left rear lower cover removal” on page 4-7.
2. Remove the MPF tray feeder. See “MPF tray feeder removal” on page 4-128. (Optional.)
3. Gently detach the MPF top cover from the MPF tray assembly.
4. Remove the MPF top cover.
Operator panel front cover (MFP) removal
1. Remove the operator panel left cover. See “Operator panel left cover removal” on page 4-10.
2. Remove the operator panel right cover. See “Operator panel right cover removal” on page 4-11.
3. Remove the rubber screw covers.