Lexmark X95 series - Front Right Cooling Fan Removal

4-80 Service Manual
7558-xxx
Go Back
Previous
Next
15. Remove the front left cooling fan.
Front right cooling fan removal
1. Remove the printer front door. See “Printer front door removal” on page 4-13.
2. Remove the transfer belt cleaner. See “Transfer belt cleaner removal” on page 4-178.
3. Remove the waste toner box.
4. Remove the four photoconductor units.
5. Remove the four toner supplies.
6. Remove the operator panel front cover. See “Operator panel front cover (MFP) removal” on page 4-8.
7. Remove the printhead retract door. See “Printhead retract door removal” on page 4-145.
8. Remove the inner cover. See “Inner cover removal” on page 4-4.
9. Remove the ATC sensor PCB bracket. See “ATC sensor PCB bracket removal” on page 4-29.