Lexmark X95 series - Pick Roller Removal

Repair information 4-141
7558-xxx
Go Back
Previous
Next
13. Remove the six screws (G) securing the PC/developer drive motor to the machine.
14. Remove the PC developer drive motor from the machine.
Pick roller removal
1. Remove the appropriate feeder unit. See “Printer tray 1 feeder removal” on page 4-144, “Tray module
media feeder removal” on page 4-281, “TTM tray 4 media feeder removal” on page 4-294, or “TTM
tray 3 feeder removal” on page 4-290.
2. Slide the plastic media guide toward the front of the machine.