Lexmark X95 series - Booklet Knife Sector Drive Gear 42 T Removal

4-328 Service Manual
7558-xxx
Go Back
Previous
Next
5. Remove the booklet front tamper motor (A).
Booklet knife sector drive gear 42T removal
1. Remove the booklet unit assembly. See “Booklet unit chassis removal” on page 4-335.
2. Remove the booklet unit motor assembly. See “Booklet folding/exit drive motor assembly removal”
on page 4-326.
3. Remove the knife solenoid frame. See “Booklet fold solenoid frame removal” on page 4-325.
4. Remove the e-clip.
Left
Connector
A