Lexmark X95 series - Sensor (Buffer Path) Static Jam; Sensor (Buffer Path) Late Jam

To Next Page

To Previous Page

2-220 Service Manual

7558-xxx

Go Back

483.01 Sensor (buffer path) static jam

483.03 Sensor (buffer path) late jam

Step Action and questions Yes No

1 Check the media path.

Is the media path free of any

media fragments?

Go to step 2. Remove any media or media

fragments.

Check the sensor (buffer path)

for proper operation.

1. Enter the Diagnostics Menu.

2. Touch SENSOR TESTS.

3. Touch FINISHER SENSOR

TESTS.

4. Touch Sensor (buffer path).

Does the display on the

operator panel change every

time the sensing area of the

above sensor is interrupted or

blocked?

Go to Step 4. Go to Step 3.

Check the sensor (buffer path) for

proper connection.

Is the above component

properly connected?

Replace the sensor (buffer path).

Go to “Sensor (buffer path)

removal” on page 4-389.

Replace connections.

Check the finisher controller

PCBA for proper connection.

Is the above component

properly connected?

Go to Step 5. Replace the connections.

POR the machine.

Does the error continue?

Replace the finisher controller

PCBA.

Go to “Finisher PCBA removal”

on page 4-353.

Problem resolved