Lexmark X95 series - Standard bin LED (MFP) Removal

4-164 Service Manual
7558-xxx
Go Back
Previous
Next
4. Disconnect the cable (B).
Standard bin LED (MFP) removal
1. Remove the operator panel right cover. See “Operator panel right cover removal” on page 4-11.
2. Remove the operator panel left cover. See “Operator panel left cover removal” on page 4-10.
3. Remove the operator panel front cover. See “Operator panel front cover (MFP) removal” on page 4-8.
4. Remove the operator panel. See “Operator panel top cover (MFP) removal” on page 4-11.
5. Remove the screw (A) securing the part to the machine.
6. Remove the standard bin LED.