Lexmark X95 series - Printer Top Cover Removal

Repair information 4-15
7558-xxx
Go Back
Previous
Next
5. Remove the two screws (A) from the printer right cover.
6. Remove the printer right cover.
Printer top cover removal
1. Open the printer front door.
2. Remove the operator panel left cover. See “Operator panel left cover removal” on page 4-10.
3. Remove the operator panel right cover. See “Operator panel right cover removal” on page 4-11.
4. Remove the operator panel front cover. See “Operator panel front cover (MFP) removal” on page 4-8.
A