Lexmark X95 series - Bridge Unit Rear Cover Removal; Bridge Unit Top Door Removal

4-306 Service Manual
7558-xxx
Go Back
Previous
Next
Bridge unit rear cover removal
1. Remove the bridge unit assembly. See “Bridge unit assembly removal” on page 4-305.
2. Remove the two screws (A) securing the bridge unit rear cover to the machine.
3. Remove the bridge unit rear cover.
Bridge unit top door removal
1. Remove the bridge unit assembly. See “Bridge unit assembly removal” on page 4-305.
2. Remove the bridge unit rear cover. See “Bridge unit rear cover removal” on page 4-306.