Lexmark X95 series - Booklet Rear Tamper Motor Removal

4-332 Service Manual
7558-xxx
Go Back
Previous
Next
13.Remove the bookelt rear tamper guide (D).
Booklet rear tamper motor removal
1. Remove the booklet unit assembly. See “Booklet unit chassis removal” on page 4-335.
2. Remove the booklet unit assembly left cover. See “Booklet unit assembly left cover removal” on
page 4-334.
3. Disconnect the connector from the booklet rear tamper motor (A).
4. Remove the two screws securing the booklet rear tamper motor (A) from the tamper frame assembly.
B
C D
Right
A