Lexmark X95 series - HCF Sensor (HCF Media Tray Set) Removal

4-442 Service Manual
7558-xxx
Go Back
Previous
Next
6. Remove the sensor (HCF media size R) (A) or the sensor (HCF media size L) (B).
HCF sensor (HCF media tray set) removal
1. Pull out the HCF media tray.
2. Remove the HCF left cover. See “HCF left cover removal” on page 4-432.
3. Remove the HCF rear cover. See “HCF rear cover removal” on page 4-441.
4. Disconnect the connector from the sensor (HCF media tray set) (A).
5. Release the hooks securing the sensor (HCF media tray set) (A) to the unit.
A
B
Front
Connectors