Lexmark X95 series - Finisher Engine;Rip Functional Failure

2-262 Service Manual
7558-xxx
Go Back
Previous
Next
999.00 Finisher engine/RIP functional failure
Step Action and questions Yes No
1
Turn the printer off and on
several times.
Does the error still occur when
the power is on?
Go to step 2. Problem resolved
2
Check the finisher controller card
assembly connections.
Are the connections of the
finisher controller card
assembly properly connected?
Replace the finisher controller
card assembly.
Go to “Finisher PCBA removal”
on page 4-353.
Problem resolved
3
Check the upper printer engine
card assembly connections.
Are the connections of the
printer engine card assembly
properly connected?
Replace the upper printer engine
PCBA.
Go to “Upper printer engine
PCBA removal” on page 4-187.
If the error remains, then go to
step 4.
Problem resolved
4
Check the lower printer engine
card assembly connections.
Are the connections of the
printer engine card assembly
properly connected?
Replace the lower printer engine
PCBA.
Go to “Lower engine PCBA
removal” on page 4-104.
If the error remains, then go to
step 5.
Problem resolved
5
Check the RIP card assembly
connections.
Are the connections of the RIP
card assembly properly
connected?
Replace the RIP card assembly.
Go to “RIP PCBA removal” on
page 4-150.
Problem resolved