Lexmark X95 series - ADF Nip Release Solenoid Removal

4-216 Service Manual
7558-xxx
Go Back
Previous
Next
5. Remove the screw (C) securing the ADF main drive sub assembly to the base.
6. Remove the ADF main drive sub assembly from the base.
ADF nip release solenoid removal
1. Remove the ADF main drive sub-assembly. See “ADF main drive sub assembly removal” on
page 4-215.
2. Remove the ADF diverter gate solenoid. See “ADF diverter gate solenoid removal” on page 4-204.