Lexmark X95 series - Sensor (ADF Inverter) Removal; Sensor (ADF Pre-Registration) Removal

4-244 Service Manual
7558-xxx
Go Back
Previous
Next
Sensor (ADF inverter) removal
1. Open the ADF top door.
2. Release the hook securing the sensor (ADF inverter).
3. Remove the sensor (ADF inverter).
Sensor (ADF pre-registration) removal
1. Open the ADF top door.
2. Remove the ADF front cover. See “ADF front cover removal” on page 4-213.
3. Remove the three screws (A) securing the grounding plate to the machine.
4. Remove the grounding plate.