Lexmark X95 series - Scanner Carriage Motor Removal

4-236 Service Manual
7558-xxx
Go Back
Previous
Next
3. Remove the LED exposure bar from the underside of the carriage.
4. Disconnect the cable (B).
Scanner carriage motor removal
1. Remove the rear upper cover. See “Rear upper cover removal” on page 4-19.
2. Remove the scanner rear cover. See “Scanner rear cover removal” on page 4-20.
3. Remove the scanner top cover. See “Scanner top cover removal” on page 4-22.
4. Release the clamp (A) from the machine.
Note: Make sure the release hook is pressed or the connection will be damaged.