Lexmark X95 series - Esf Solutions Backup

4-152 Service Manual
7558-xxx
Go Back
Previous
Next
2. Remove the RIP PCBA.
Important: The replacement RIP PCBA does not contain an NVRAM card. Remove the NVRAM card from the
old RIP PCBA and install on the replacement RIP PCBA to restore the NVRAM settings.
eSF solutions backup
If a technician needs to replace the RIP PCBA, the steps below should be taken to back up the eSF solutions
and settings:
1. POR the printer into invalid engine code mode.
2. Open a Web browser and navigate to the printer’s Web page.
3. Navigate to Settings, and click the link.
4. Navigate to Solutions and click the link.
5. Navigate to Embedded Solutions and click the link.
6. On the Embedded Solutions page, select the apps to be exported by clicking the selection box next to the
app.
7. Choose Export.