Lexmark X95 series - Sensor (Tray 5 Media Level) Removal

Repair information 4-453
7558-xxx
Go Back
Previous
Next
7. Remove the sensor (HCF top door interlock) (A).
Sensor (tray 5 media level) removal
1. Open the HCF top door.
2. Open the HCF feed unit assembly.
3. Disconnect the connector from the sensor (tray 5 media level) (A).
4. Release the hooks securing the sensor (tray 5 media level) (A) from the HCF feed unit assembly (B).
A
B
Connector