Lexmark X95 series - 8 Xx Service Error Codes

2-34 Service Manual
7558-xxx
Go Back
Previous
Next
8xx service error codes
Error code Description Action
841.00
Service scanner
failure
Image pipeline ASIC failure The image pipeline for processing the data
that comes from the scanner, prior to being
printed, has failed.
Go to “841.00 Image pipeline ASIC
failure” on page 2-240.
842.00
Service scanner
failure
Scanner communication failure Controller detected a communication
failure. Communication timeout.
Go to “842.00 Scanner communication
failure” on page 2-241.
842.01
Service scanner
failure
Scanner communication failure Controller detected a communication
failure packet timeout.
Go to “842.01 Scanner communication
failure” on page 2-241.
842.02
Service scanner
failure
Scanner communication failure Controller detected a communication
failure. Invalid message checksum.
Go to “842.02 Scanner communication
failure” on page 2-242.
842.03
Service scanner
failure
Scanner communication failure Controller detected a communication
failure. Invalid message parameter(s).
Go to “842.03 Scanner communication
failure” on page 2-242.
842.04
Service scanner
failure
Scanner communication failure Controller detected a communication
failure. Invalid message command.
Go to “842.04 Scanner communication
failure” on page 2-243.
842.10
Service scanner
failure
Scanner unit assembly - ADF
communication failure
Communication failure occurred between
the scanner controller card assembly and
the ADF controller card assembly.
Go to “842.10 Scanner unit assembly -
ADF communication failure” on
page 2-244.
842.11
Service scanner
failure
Scanner communication failure (by
scanner)
Communication failure occurred between
the scanner controller card assembly and
the RIP card assembly.
Go to “842.11 Scanner communication
failure (by scanner)” on page 2-244.
842.12
Service scanner
failure
Scanner unit assembly communication
failure
Communication failure occurred between
the scanner controller card assembly and
the RIP card assembly.
Go to “842.12 Scanner unit assembly
communication failure” on page 2-245.