Lexmark X95 series - Sensor (Printer Right Front Door Interlock) Removal

4-162 Service Manual
7558-xxx
Go Back
Previous
Next
11. Remove the sensor (printer left front door interlock).
Sensor (printer right front door interlock) removal
1. Remove the printer right side cover. See “Printer right cover removal” on page 4-14.
2. Remove the LVPS subfan guide. See “LVPS front fan guide removal” on page 4-111.
3. Remove the LVPS. See “LVPS PCBA removal” on page 4-112.
4. Disconnect the cable (A) from the sensor (printer right front door interlock).