Lexmark X95 series - Booklet Unit Gear Train Frame Removal

4-336 Service Manual
7558-xxx
Go Back
Previous
Next
6. Remove booklet unit (A).
Booklet unit gear train frame removal
1. Remove the booklet unit assembly. See “Booklet unit chassis removal” on page 4-335.
2. Remove the booklet unit motor assembly. See “Booklet folding/exit drive motor assembly removal”
on page 4-326.
3. Remove the knife solenoid frame. See “Booklet fold solenoid frame removal” on page 4-325.
4. Remove the booklet media entrance drive motor. See “Booklet media entrance drive motor removal”
on page 4-329.
5. Remove the booklet knife sector drive gear 42T. See “Booklet knife sector drive gear 42T removal” on
page 4-328.
6. Remove the gear 18T.
7. Remove the three screws securing the booklet unit gear train frame (A) from the booklet unit.
A